QTZ63（TC5610）Tower Crane
- · Full way solution
- · Production cost saving
- · Excellent lifetime precision
- · Electrical control
- · Top end Design
- · High Efficiency
- · Consistent quality
- · Increased operating reliability
Product Features
QTZ63(TC5610) crane is a kind of new tower crane designed by our company for construction and it is upper rotating self-climbing tower crane for multipurpose,with balance boom,and trolley luffing.The maximum working radius is 56m,load capacity is 6t, when it works in attached type,the height will reach 140m.The main features as follows:
For the upside, we use the hydraulic jacking system to increase or reduce the mast section, and the height of tower crane can rise or lower according to the height of building, moreover the lifting capacity will not influenced by the height of tower crane.
The tower crane has a high wording speed, good speed control performance, and work stably and efficiently. The hoisting mechanism adopts three-speed motor and single speed ratio reducer, to realize low speed for overload and high speed for light load. The luffing mechanism pulls the trolley luff on the balance boom with a good installation performance. And the slewing mechanism adopts wire wrapping motor and planetary reducer, configuring hydraulic couplers, bearing capacity is high, and starts smoothly, working reliable.
The tower crane has a large working scope, multi working mode, and wide applicable objects. When it works free standing, the maximum lifting height is 40m, and in attached type, the height will reach 140m.
The safety device is adopted in yichun, jiangxi province. All the matching kits are domestic famous brands.
The standard section size is 1.6m x 1.6m x 2.5 m, the main body material is Q345B, the pin shaft type material is mainly 40Cr, 45# steel, and the steel tube material is seamless tube.
QTZ63(TC5610) crane is a kind of new tower crane designed by our company for construction and it is upper rotating self-climbing tower crane for multipurpose,with balance boom,and trolley luffing.The maximum working radius is 56m,load capacity is 6t, when it works in attached type,the height will reach 140m.The main features as follows:
For the upside, we use the hydraulic jacking system to increase or reduce the mast section, and the height of tower crane can rise or lower according to the height of building, moreover the lifting capacity will not influenced by the height of tower crane.
The tower crane has a high wording speed, good speed control performance, and work stably and efficiently. The hoisting mechanism adopts three-speed motor and single speed ratio reducer, to realize low speed for overload and high speed for light load. The luffing mechanism pulls the trolley luff on the balance boom with a good installation performance. And the slewing mechanism adopts wire wrapping motor and planetary reducer, configuring hydraulic couplers, bearing capacity is high, and starts smoothly, working reliable.
The tower crane has a large working scope, multi working mode, and wide applicable objects. When it works free standing, the maximum lifting height is 40m, and in attached type, the height will reach 140m.
The safety device is adopted in yichun, jiangxi province. All the matching kits are domestic famous brands.
The standard section size is 1.6m x 1.6m x 2.5 m, the main body material is Q345B, the pin shaft type material is mainly 40Cr, 45# steel, and the steel tube material is seamless tube.
Parameters
| Classification group of mechanisms | Hoisting mechanism | M5 | |||||
| Slewing mechanism | M4 | ||||||
| Pulling mechanism | M4 | ||||||
| Lifting height（m） | Rate | Fixed condition | Attached condition | ||||
| a＝2 | 40 | 140 | |||||
| a＝4 | 40 | 70 | |||||
| Max. load capacity（t） | 6 | ||||||
| Radius(m) | Max radius (m) | 56 | |||||
| Min radius(m) | 2 | ||||||
| Hoisting mechanism | Speed | Rate | a= 2 | a= 4 | |||
| Load capacity（t） | 3 | 3 | 1.5 | 6 | 6 | ||
| Speed(m/min) | 8.5 | 40 | 80 | 4.25 | 20 | ||
| Motor model, power, rotate speed | YJZD225L-4/8/32-24/24/5.4kW-1410/710/150r/min | ||||||
| Wire rope | 6×29W+FC-Φ12-1770 | ||||||
| Slewing mechanism | Slewing speed(r/min) | Motor model | Power(KW) | Rotate speed(r/min) | |||
| 0～0.6 | YZR132M1-6 | 2×2.2 | 908 | ||||
| Pulling mechanism | Speed(m/min) | Motor model | Power(KW) | Rotate speed(m/min) | |||
| 40.5/20 | YDEJ132S-4/8-B5 | 3.3/2.2 | 1440/720 | ||||
| Wire rope | 6×19W+FC-Φ7.7-1570-ZS | ||||||
| Climbing mechanism | Speed(m/min) | Motor model | Power(KW) | Rotate speed(m/min) | |||
| 0.5 | Y132S- 4 | 5.5 | 1440 | ||||
RELATED PRODUCTS
-
SC200/200Z Construction Hoist
-
QTZ400(TC7050) Tower Crane
-
GSK5420THB52R Truck-Mounted Concrete Pump
